HomeBlogBlog3500W Electric Demolition Hammer: 1900 BPM + 2 Chisels

3500W Electric Demolition Hammer: 1900 BPM + 2 Chisels

3500W Electric Demolition Jack Hammer (1900 BPM) Concrete Breaker with 2 Chisels

Breaking up concrete, removing tile beds, or cutting through compacted masonry calls for a demolition hammer that hits hard, holds steady, and accepts the right chisel for the job. This 3500W electric demolition jack hammer delivers 1900 blows per minute and includes two chisels to help tackle common demolition tasks with fewer tool changes.

What This Demolition Hammer Is Built For

A corded demolition hammer is purpose-built for impact-heavy work where continuous power and consistent strike force matter more than portability. This style of breaker is commonly used when the goal is to fracture material efficiently and then clear it in manageable sections.

Concrete and slab breakup for small-to-medium demolition jobs
Removing old mortar, plaster, and tile beds where controlled chipping matters
Opening channels in concrete for basic routing work (with the appropriate chisel)
Demolition of masonry features such as steps, curbs, and small retaining structures
Jobsite use where a corded, continuous-power tool is preferred over battery runtime limits

If you’re planning on frequent concrete removal, it helps to pair the tool with a simple workflow: start cracks with focused strikes, separate sections with a flatter profile, then move rubble out of the impact zone so the hammer’s energy keeps going into the slab—not into loose debris.

Key Specs and What They Mean on the Job

Specs can look like simple numbers, but each one affects how the tool behaves in real material. A 3500W class motor is aimed at maintaining strong striking force under sustained load, while 1900 BPM typically points toward heavier hits rather than fast, light tapping.

3500W motor power: designed for heavy striking force under sustained load
1900 BPM impact rate: prioritizes strong hits over high-frequency light chipping
Corded electric operation: consistent performance without battery swaps
Includes two chisels: supports switching between general breakup and more targeted chipping
Better results: come from matching chisel type and angle to the material and fracture pattern

Quick specification snapshot

Feature	Value	Why it matters
Power	3500W	Higher power supports tougher concrete and longer sessions
Impact rate	1900 BPM	Lower BPM with strong blows helps fracture thick material
Included bits	2 chisels	Covers common tasks without buying extras immediately
Tool type	Electric demolition hammer	Steady output for extended demolition work

Chisels: Choosing the Right One for the Task

The included chisels aren’t interchangeable “extras”—they’re the main way to steer the work. Choosing the right profile changes how cracks form, how quickly material separates, and how controlled the demolition feels.

Point chisel: concentrates force to start cracks in thick or reinforced sections and to break up edges
Flat chisel: lifts and peels material such as tile beds, thin concrete layers, and mortar; also useful for widening cracks once started
Use the point chisel to initiate fractures, then switch to the flat chisel to clear and separate material faster
Keep chisels sharp enough for effective penetration; a heavily rounded tip can slow progress and increase vibration
Let the tool do the work—excessive prying with a chisel can bend the shank and reduce bit life

A practical approach is to “set the break” first: drive the point chisel to form a crack line, then come back with the flat chisel to lift, shear, and peel material away cleanly.

Setup and Technique for Cleaner Breaks

Technique is a major factor in how fast the slab breaks and how much fatigue you rack up. Small changes—where you start, the angle you hold, and how often you reposition—can make the work feel dramatically smoother.

Start at an edge, joint, or existing crack when possible; it reduces effort and controls break lines
Work in a grid pattern on slabs: score multiple fracture points rather than trying to pulverize a single spot
Keep a consistent working angle: too steep can cause bouncing; too shallow can skate across the surface
Apply firm, steady downward pressure without forcing—forcing increases fatigue and can reduce impact efficiency
Pause periodically to clear rubble and re-position; buried debris absorbs impact energy

Safety and Dust Control That Matter During Concrete Demolition

For dust control references, review OSHA’s guidance on respirable crystalline silica for construction work: OSHA: Respirable Crystalline Silica Standard for Construction. For additional hazard background and control options, see NIOSH silica resources. Noise exposure can also add up quickly; NIOSH hearing protection guidance is a solid reference for safer practices.

Maintenance for Reliable Performance

When This Style of Tool Is a Good Fit (and When It Isn’t)

In-Stock Picks

FAQ

What’s the difference between a point chisel and a flat chisel for concrete demolition?

A point chisel concentrates force into a smaller area, making it better for starting cracks and breaking stubborn, thicker sections. A flat chisel is better for peeling and clearing material once it’s fractured, and it’s often faster for removing tile beds or mortar after the break line is established.

Is 1900 BPM enough for breaking concrete?

Yes, because BPM is only part of the story—many heavy breakers use a lower blow rate paired with higher impact energy to fracture thick concrete. Results depend on slab thickness, reinforcement, and using the right chisel and working angle to encourage cracking instead of surface chatter.

How can dust be reduced when breaking concrete indoors?

Use wet methods where feasible or on-tool dust extraction with appropriate filtration, and isolate the work area with airflow control to keep dust from spreading. Wear respiratory protection suited for silica dust, and clean using methods that avoid re-suspending fine particles.